PyRDP - RDP Monster-In-The-Middle (Mitm) And Library For Python With The Ability To Watch Connections Live Or After The Fact

#447
Topic created · 1 Posts · 0 Views

  • PyRDP is a Python Remote Desktop Protocol (RDP) Monster-in-the-Middle (MITM) tool and library.
    It features a few tools:

    • RDP Monster-in-the-Middle
    • Logs credentials used when connecting
    • Steals data copied to the clipboard
    • Saves a copy of the files transferred over the network
    • Crawls shared drives in the background and saves them locally
    • Saves replays of connections so you can look at them later
    • Runs console commands or PowerShell payloads automatically on new connections
    • RDP Player:
    • See live RDP connections coming from the MITM
    • View replays of RDP connections
    • Take control of active RDP sessions while hiding your actions
    • List the client's mapped drives and download files from them during active sessions
    • RDP Certificate Cloner:
    • Create a self-signed X509 certificate with the same fields as an RDP server's certificate
      PyRDP was
      . This tool is being developed with both pentest and malware research use cases in mind.

      Supported Systems
      PyRDP should work on Python 3.6 and up on the x86-64, ARM and ARM64 platforms.
      This tool has been tested to work on Python 3.6 on Linux (Ubuntu 18.04), Raspberry Pi and Windows (see section Installing on Windows). It has not been tested on macOS.
      Installing
      Using the Docker Image
      This is the easiest installation method if you have docker installed and working.
    docker pull gosecure/pyrdp:latest  
    

    As an alternative we have a slimmer image without the GUI and ffmpeg dependencies. This is the only provided image on ARM platforms.

    docker pull gosecure/pyrdp:latest-slim  
    

    You can find the list of all our Docker images on the gosecure/pyrdp DockerHub page.
    From Git Source
    We recommend installing PyRDP in a virtual environment to avoid dependency issues.
    First, make sure to install the prerequisite packages (on Ubuntu). We provide two types of installs a full one and a slim one. Install the dependencies according to your use case.

    # Full install (GUI, transcoding to MP4)  
    sudo apt install python3 python3-pip python3-dev python3-setuptools python3-venv \  
    build-essential python3-dev git openssl \  
    libdbus-1-dev libdbus-glib-1-dev libgl1-mesa-glx \  
    notify-osd dbus-x11 libxkbcommon-x11-0 libxcb-xinerama0 \  
    libavformat-dev libavcodec-dev libavdevice-dev \  
    libavutil-dev libswscale-dev libswresample-dev libavfilter-dev  
    # Slim install (no GUI, no transcoding)  
    sudo apt install python3 python3-pip python3-setuptools python3-venv \  
    build-essential python3-dev git openssl  
    

    Grab PyRDP's source code:

    git clone https://github.com/gosecure/pyrdp.git  
    

    Then, create your virtual environment in the venv directory inside PyRDP's directory:

    cd pyrdp  
    python3 -m venv venv  
    

    DO NOT use the root PyRDP directory for the virtual environment folder (python3 -m venv .). You will make a mess, and using a directory name like venv is more standard anyway.
    Before installing the dependencies, you need to activate your virtual environment:

    source venv/bin/activate  
    

    Finally, you can install the project with Pip:

    pip3 install -U pip setuptools wheel  
    # Without GUI and ffmpeg dependencies  
    pip3 install -U -e .  
    # With GUI and ffmpeg dependencies  
    pip3 install -U -e '.[full]'  
    

    This should install the dependencies required to run PyRDP. If you choose to install without GUI or ffmpeg dependencies, it will not be possible to use pyrdp-player without headless mode (--headless) or pyrdp-convert.
    If you ever want to leave your virtual environment, you can simply deactivate it:

    deactivate  
    

    Note that you will have to activate your environment every time you want to have the PyRDP scripts available as shell commands.
    Installing on Windows
    The steps are almost the same. There are two additional prerequisites.

    1. Any C compiler
    2. OpenSSL. Make sure it is reachable from your $PATH.
      Then, create your virtual environment in PyRDP's directory:
    cd pyrdp  
    python3 -m venv venv  
    

    DO NOT use the root PyRDP directory for the virtual environment folder (python3 -m venv .). You will make a mess, and using a directory name like venv is more standard anyway.
    Before installing the dependencies, you need to activate your virtual environment:

    venv\Scripts\activate  
    

    Finally, you can install the project with Pip:

    pip3 install -U pip setuptools wheel  
    pip3 install -U -e ".[full]"  
    

    This should install all the dependencies required to run PyRDP.
    If you ever want to leave your virtual environment, you can simply deactivate it:

    deactivate  
    

    Note that you will have to activate your environment every time you want to have the PyRDP scripts available as shell commands.
    Building the Docker Image
    First of all, build the image by executing this command at the root of PyRDP (where Dockerfile is located):

    docker build -t pyrdp .  
    

    As an alternative we have a slimmer image without the GUI and ffmpeg dependencies:

    docker build -f Dockerfile.slim -t pyrdp .  
    

    Afterwards, you can execute PyRDP by invoking the pyrdp docker container. See Usage instructions and the Docker specific instructions for details.
    Cross-platform builds can be achieved using buildx:

    docker buildx build --platform linux/arm,linux/amd64 -t pyrdp -f Dockerfile.slim .  
    

    Migrating away from pycrypto
    Since pycrypto isn't maintained anymore, we chose to migrate to pycryptodome. If you get this error, it means that you are using the module pycrypto instead of pycryptodome.

    [...]  
    File "[...]/pyrdp/pyrdp/pdu/rdp/connection.py", line 10, in <module>  
    from Crypto.PublicKey.RSA import RsaKey  
    ImportError: cannot import name 'RsaKey'  
    

    You will need to remove the module pycrypto and reinstall PyRDP.

    pip3 uninstall pycrypto  
    pip3 install -U -e .  
    

    Using PyRDP
    Using the PyRDP Monster-in-the-Middle
    Use pyrdp-mitm.py <ServerIP> or pyrdp-mitm.py <ServerIP>:<ServerPort> to run the MITM.
    Assuming you have an RDP server running on 192.168.1.10 and listening on port 3389, you would run:

    pyrdp-mitm.py 192.168.1.10  
    

    When running the MITM for the first time on Linux, a private key and certificate should be generated for you in ~/.config/pyrdp. These are used when TLS security is used on a connection. You can use them to decrypt PyRDP traffic in Wireshark, for example.
    Specifying the private key and certificate
    If key generation didn't work or you want to use a custom key and certificate, you can specify them using the -c and -k arguments:

    pyrdp-mitm.py 192.168.1.10 -k private_key.pem -c certificate.pem  
    

    Connecting to the PyRDP player
    If you want to see live RDP connections through the PyRDP player, you will need to specify the ip and port on which the player is listening using the -i and -d arguments. Note: the port argument is optional, the default port is 3000.

    pyrdp-mitm.py 192.168.1.10 -i 127.0.0.1 -d 3000  
    

    Connecting to a PyRDP player when the MITM is running on a server
    If you are running the MITM on a server and still want to see live RDP connections, you should use SSH remote port forwarding to forward a port on your server to the player's port on your machine. Once this is done, you pass 127.0.0.1 and the forwarded port as arguments to the MITM. For example, if port 4000 on the server is forwarded to the player's port on your machine, this would be the command to use:

    pyrdp-mitm.py 192.168.1.10 -i 127.0.0.1 -d 4000  
    

    Running payloads on new connections
    PyRDP has support for running console commands or PowerShell payloads automatically when new connections are made. Due to the nature of RDP, the process is a bit hackish and is not always 100% reliable. Here is how it works:

    1. Wait for the user to be authenticated.
    2. Block the client's input / output to hide the payload and prevent interference.
    3. Send a fake Windows+R sequence and run cmd.exe.
    4. Run the payload as a console command and exit the console. If a PowerShell payload is configured, it is run with powershell -enc <PAYLOAD>.
    5. Wait a bit to allow the payload to complete.
    6. Restore the client's input / output.
      For this to work, you need to set 3 arguments:
    • the payload
    • the delay before the payload starts
    • the payload's duration
      Setting the payload
      You can use one of the following arguments to set the payload to run:
    • --payload, a string containing console commands
    • --payload-powershell, a string containing PowerShell commands
    • --payload-powershell-file, a path to a PowerShell script
      Choosing when to start the payload
      For the moment, PyRDP does not detect when the user is logged on. You must give it an amount of time to wait for before running the payload. After this amount of time has passed, it will send the fake key sequences and expect the payload to run properly. To do this, you use the --payload-delay argument. The delay is in milliseconds. For example, if you expect the user to be logged in within the first 5 seconds, you would use the following arguments:
    --payload-delay 5000  
    

    This could be made more accurate by leveraging some messages exchanged during RDPDR initialization. See this issue if you're interested in making this work better.
    Choosing when to resume normal activity
    Because there is no direct way to know when the console has stopped running, you must tell PyRDP how long you want the client's input / output to be blocked. We recommend you set this to the maximum amount of time you would expect the console that is running your payload to be visible. In other words, the amount of time you would expect your payload to complete. To set the payload duration, you use the --payload-duration argument with an amount of time in milliseconds. For example, if you expect your payload to take up to 5 seconds to complete, you would use the following argument:

    --payload-duration 5000  
    

    This will block the client's input / output for 5 seconds to hide the console and prevent interference. After 5 seconds, input / output is restored back to normal.
    Other MITM arguments
    Run pyrdp-mitm.py --help for a full list of arguments.
    --no-downgrade
    This argument is useful when running PyRDP in Honeypot scenarios to avoid scanner fingerprinting. When the switch is enabled, PyRDP will not downgrade unsupported extensions and let the traffic through transparently. The player will likely not be able to successfully replay video traffic, but the following supported channels should still be accessible:

    • Keystroke recording
    • Mouse position updates
    • Clipboard access (passively)
    • Drive access (passively)
      This feature is still a work in progress and some downgrading is currently unavoidable to allow the connection to be established. The following are currently not affected by this switch and will still be disabled:
    • FIPS Encryption
    • Non-TLS encryption protocols
    • ClientInfo compression
    • Virtual Channel compression
      NOTE: If being able to eventually replay the full session is important, a good solution is to record the raw RDP traffic using Wireshark and keep the TLS master secrets. Whenever PyRDP adds support for additional extensions, it would then become possible to extract a valid RDP replay file from the raw network capture.
      --transparent
      Tells PyRDP to attempt to spoof the source IP address of the client so that the server sees the real IP address instead of the MITM one. This option is only useful in certain scenarios where the MITM is physically a gateway between clients and the server and sees all traffic. Specific examples can be found here.
      NOTE: This requires root privileges, only works on Linux and requires manual firewall configuration to ensure that traffic is routed properly.
      --no-gdi: Disable Accelerated Graphics Pipeline
      PyRDP downgrades video to the the most recent graphics pipeline that it supports. This switch explicitly tells the MITM to not use the Graphics Device Interface Acceleration extensions to stream video. The advantage of this mode is a significant reduction in required bandwidth for high resolution connections.
      Note that some GDI drawing orders are currently unimplemented because they appear to be unused. If you have a replay which contains any unsupported or untested order, do not hesitate to share it with the project maintainers so that support can be added as required. (Make sure that the trace does not contain sensitive information)
      Using the PyRDP Player
      Use pyrdp-player.py to run the player.
      Playing a replay file
      You can use the menu to open a new replay file: File > Open.
      You can also open replay files when launching the player:
    pyrdp-player.py <FILE1> <FILE2> ...  
    

    Listening for live connections
    The player always listens for live connections. By default, the listening port is 3000, but it can be changed:

    pyrdp-player.py -p <PORT>  
    

    Changing the listening address
    By default, the player only listens to connections coming from the local machine. We do not recommend opening up the player to other machines. If you still want to change the listening address, you can do it with -b:

    pyrdp-player.py -b <ADDRESS>  
    

    Other player arguments
    Run pyrdp-player.py --help for a full list of arguments.
    Using the PyRDP Certificate Cloner
    The PyRDP certificate cloner creates a brand new X509 certificate by using the values from an existing RDP server's certificate. It connects to an RDP server, downloads its certificate, generates a new private key and replaces the public key and signature of the certificate using the new private key. This can be used in a pentest if, for example, you're trying to trick a legitimate user into going through your MITM. Using a certificate that looks like a legitimate certificate could increase your success rate.
    Cloning a certificate
    You can clone a certificate by using pyrdp-clonecert.py:

    pyrdp-clonecert.py 192.168.1.10 cert.pem -o key.pem  
    

    The -o parameter defines the path name to use for the generated private key.
    Using a custom private key
    If you want to use your own private key instead of generating a new one:

    pyrdp-clonecert.py 192.168.1.10 cert.pem -i input_key.pem  
    

    Other cloner arguments
    Run pyrdp-clonecert.py --help for a full list of arguments.
    Using PyRDP Convert
    pyrdp-convert is a helper script that performs several useful conversions. The script has the best chance of working on traffic captured by PyRDP due to unsupported RDP protocol features that might be used in a non-intercepted connection.
    The following conversions are supported:

    • Network Capture (PCAP) to PyRDP replay file
    • Network Capture to MP4 video file
    • Replay file to MP4 video file
      The script supports both encrypted (TLS) network captures (by providing --secrets ssl.log) and decrypted PDU exports.

    WARNING: pcapng and pcap with nanosecond timestamps are not compatible with pyrdp-convert and will create replay files that fail to playback or export to MP4. This is due to incompatible timestamp formats.

    # Export the session coming client 10.2.0.198 to a .pyrdp file.  
    pyrdp-convert.py --src 10.2.0.198 --secrets ssl.log -o path/to/output capture.pcap  
    # Or as an MP4 video  
    pyrdp-convert.py --src 10.2.0.198 --secrets ssl.log -o path/to/output -f mp4 capture.pcap  
    # List the sessions in a network trace, along with the decryptable ones.  
    pyrdp-convert.py --list capture.pcap  
    

    Note that MP4 conversion requires libavcodec and ffmpeg, so this may require extra steps on Windows.
    Manually decrypted network traces can be exported from Wireshark by selecting File > Export PDUs and selecting OSI Layer 7. When using this method, it is also recommended to filter the exported stream to only contain the TCP stream of the RDP session which must be converted.
    First, make sure you configured wireshark to load TLS secrets:


    Next, export OSI Layer 7 PDUs:

    And lastly, filter down the trace to contain only the conversation of interest (Optional but recommended) by applying a display filter and clicking File > Export Specified Packets...

    Now this trace can be used directly in pyrdp-convert.
    Configuring PyRDP
    Most of the PyRDP configurations are done through command line switches, but it is also possible to use a configuration file for certain settings such as log configuration.
    The default configuration files used by PyRDP are located in mitm.default.ini and player.default.ini. Both files are thoroughly documented and can serve as a basis for further configuration.
    In the future there are plans to support other aspects of PyRDP configuration through those configuration files.
    Using PyRDP as a Library
    If you're interested in experimenting with RDP and making your own tools, head over to our documentation section for more information.
    Using PyRDP with twistd
    The PyRDP MITM component was also implemented as a twistd plugin. This enables you to run it in debug mode and allows you to get an interactive debugging repl (pdb) if you send a SIGUSR2 to the twistd process.

    twistd --debug pyrdp -t <target>  
    

    Then to get the repl:

    killall -SIGUSR2 twistd  
    

    Using PyRDP with twistd in Docker
    In a directory with our docker-compose.yml you can run something like this:

    docker-compose run -p 3389:3389 pyrdp twistd --debug pyrdp --target 192.168.1.10:3389  
    

    This will allocate a TTY and you will have access to Pdb's REPL. Trying to add --debug to the docker-compose.yml command will fail because there is no TTY allocated.
    Using PyRDP with Bettercap
    We developped our own Bettercap module, rdp.proxy, to monster-in-the-middle all RDP connections on a given LAN. Check out this document for more information.
    Docker Specific Usage Instructions
    Since docker restricts the interactions with the host system (filesystem and network), the PyRDP docker image must be run with some parameters depending on your use case. This section documents those parameters.
    We refer to the publicly provided docker image but if you built your own replace gosecure/pyrdp with the name of your locally built image.
    Mapping a Listening Port
    In most of the monster-in-the-middle cases you will need to map a port of your host into the docker image. This is achieved by the --publish (-p) parameters applied to docker run.
    For example, to listen on 3389 (RDP's default port) on all interfaces, use:

    docker run -p 3389:3389 gosecure/pyrdp pyrdp-mitm.py 192.168.1.10  
    

    Logs and Artifacts Storage
    To store the PyRDP output permanently (logs, files, etc.), add the --volume (-v) option to the previous command. In this example we store the files relatively to the current directory in pyrdp_output:

    docker run -v $PWD/pyrdp_output:/home/pyrdp/pyrdp_output -p 3389:3389 gosecure/pyrdp pyrdp-mitm.py 192.168.1.10  
    

    Make sure that your destination directory is owned by a user with a UID of 1000, otherwise you will get permission denied errors. If you are the only non-root user on the system, usually your user will be assigned UID 1000.
    Logging the host IP address
    If you want PyRDP to log the host IP address in its logs, you can set the HOST_IP environment variable when using docker run:

    docker run -p 3389:3389 -e HOST_IP=192.168.1.9 gosecure/pyrdp pyrdp-mitm.py 192.168.1.10  
    

    Using the GUI Player in Docker
    Using the player will require you to export the DISPLAY environment variable from the host to the docker. This redirects the GUI of the player to the host screen. You also need to expose the host's network and prevent Qt from using the MIT-SHM X11 Shared Memory Extension. To do so, add the -e and --net options to the run command:

    docker run -e DISPLAY=$DISPLAY -e QT_X11_NO_MITSHM=1 --net=host gosecure/pyrdp pyrdp-player.py  
    

    Keep in mind that exposing the host's network to docker can compromise the isolation between your container and the host. If you plan on using the player, X11 forwarding using an SSH connection would be a more secure way.
    PyRDP Lore

    • : credential logging, clipboard stealing, client-side file browsing and a session take-over
    • : the execution of cmd or powershell payloads when a client successfully authenticates
Log in to reply